UCHIDA FOILGLAZER
Features
- Laminating & Foil fusing in one box.
- Easy setting, intuitive operation.
- Automatic air suction feeding.
- Enhance your productivity.
- Special film for perfect lamination.
- On-demand foil fusing.
Technical Specification
| Functions | : Laminating and foilglazing (foil fusing) |
| Feedable paper size | : Laminating: 297(W)x210(L) – 365(W)x600(L) mm |
| : Foilglazing: 148(W)x210(L) – 365(W)x600(L) mm | |
| Paperweight | : 110 – 400 gsm* |
| Paper quality | : Coater paper, Art paper, Fine quality paper etc. |
| : *Please validate some sheets to check the results before production. | |
| Feeding mechanism | : Upper belt air suction feed + blower |
| Operation | : 4.3″ color touch screen, Inching switch (forward/backward) |
| : Pressure roller lifting lever, Emergency button | |
| Feed tray capacity | : 50mm |
| Delivery speed | : Laminating: 5m/min. |
| : Foilglazing: 3m/min. | |
| Usable film (Laminating) | : Width: 200 – 340mm |
| : Outer diameter: Up to 200mm | |
| : Thickness: 20 – 45 micron | |
| : Core diameter: 2 inch (58mm) | |
| Usable film (Foilglazing) | : Width: 320mm |
| : Outer diameter: Up to 200mm | |
| : Core diameter: 1 inch (26mm) | |
| Laminating method | : Heat roller + halogen heater. |
| Warm up time | : less than 10 min. |
| Roller temperature | : Off / 80 – 160 °C |
| Roller pressure | : Pneumatic |
| Required compressor | : Discharge amount more than 5.0L/min, Tank capacity more than 5.0L, |
| : Tube diameter 6mm, Minimum pressure 0.6MPa | |
| Separation method | : Burst cutting |
| Dimensions | : Main body: 582(W)x621(D)x535(H) mm |
| : With feed tray and stacker: 1,717(W)x621(D)x535(H) mm | |
| : With machine table: 1,717(W)x621(D)x1,206(H) mm | |
| Weight | : Complete package: 85 kgs |
| Power source | : 100-120VAC or 220-240VAC 50/60Hz, single phase |
| Power consumption | : 1,500W |
